If you too are bugged by the Spell check feature (which is usually very helpful,except at times) on your iPhone or iPod Touch and want the spell check feature to be disabled so that you can type out all the words as you want them to appear, this article is a must read for you.
The process is pretty simple and straight forward, on your iPod Touch or iPhone head over to the Settings menu, then tap on General, next tap on the item called Keyboard. Once in the Keyboard item menu, all you need to do is turn off autocorrection. This will disable the spell check feature on your iPod Touch or iPhone device.
You can even set the Auto-Capitalization feature to ON or OFF from the same menu.
Friday, August 6, 2010
Iphone 4 : Activation, Jailbreak and Unlocked
Good day everyone. In order to use your iPhone, you have to activate it. While setting up the orignal iPhone and iPhone 3G required using iTunes, newer models are activated and mostly set up in the store. This is a step-by-step guide to everything you need to know about iPhone activation to get you started using it right away!
Activation :-
This method i tested using iphone 4. :) Turn on your iphone and attached it to your computer. Make sure your iTunes is the latest version, which is 9.2.1. I don't i highly recommend that to upgrade your iTunes first. After that get connected to your pc using USB cable that provided to you and follow the screen instructions. Enter your details there and you'll be asked about your iStore account too. iStore account is important for to access tones of apps in the Apple apps store.
Jailbreak :-
These are instructions on how to jailbreak any iPhone (including the iPhone 4) on iOS 4 using JailbreakMe by Comex. Before beginning make sure your device is activation on iOS 4.0.0 or 4.0.1. Ok for jailbreaking follow the steps below :-
1. Press to launch Safari from your Springboard. Make sure you get connected to the internet.
2. Press to select the address bar and input http://jailbreakme.com then press the Done button.
3. To begin the jailbreak simply move the slider to right. [slide to jailbreak]
4. You will be displayed a status bar as the download progresses.
5. Once the download is complete the jailbreak process will begin
6. Once you are notified that the jailbreak process is complete press the OK button.
7. Press the Home button to reveal Cydia on your desktop!
8. Congratulations you are done! You may now continue by installing UltraSn0w to unlock :)
Unlock :-
You still can't use your iPhone because your SIM is not officially iPhone carrier. In Malaysia, if you want to use iPhone 4, you need to wait for Maxis announced it arrival. Maxis is a official carrier for iPhone in Malaysia. So if you're using others service such as Celcom or DIGI, then you need to unlock it first. :) Here's how :-
Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, 05.13.04, or 01.59 baseband(modem firmware).
1. Launch Cydia Installer from your SpringBoard.Make sure you get connected to the internet.
2. Press to select the Manage tab at the bottom of the screen.
3. Press to select the large Sources button
4. If the ultrasn0w repo is not present press the Edit button at the top right of the screen.
Otherwise, skip to step nine.
5. Press the Add button at the top left of the screen.
6. Enter http://repo666.ultrasn0w.com/ as the source url and press the Add Source button.
7. Once the source has been added press the large Return to Cydia button.
8. Press the Done button at the top right of the screen.
9. Press to select repo666.ultrasn0w.com from the list of user entered sources.
10.Press to select ultrasn0w from the list of packages
11.Press the Install button at the top right of the screen.
12.Press the Confirm button at the top right of the screen.
13.After installation completes successfully press the large Return to Cydia button.
14.Now press the Home button then power off and power on the iPhone.
15.You should now be able to insert the SIM of your choice! :D
A big thank you to all the members of the iPhone Dev-Team for all their hard work! It is much appreciated by all.
That's it fellas.
Activation :-
This method i tested using iphone 4. :) Turn on your iphone and attached it to your computer. Make sure your iTunes is the latest version, which is 9.2.1. I don't i highly recommend that to upgrade your iTunes first. After that get connected to your pc using USB cable that provided to you and follow the screen instructions. Enter your details there and you'll be asked about your iStore account too. iStore account is important for to access tones of apps in the Apple apps store.
Jailbreak :-
These are instructions on how to jailbreak any iPhone (including the iPhone 4) on iOS 4 using JailbreakMe by Comex. Before beginning make sure your device is activation on iOS 4.0.0 or 4.0.1. Ok for jailbreaking follow the steps below :-
1. Press to launch Safari from your Springboard. Make sure you get connected to the internet.
2. Press to select the address bar and input http://jailbreakme.com then press the Done button.
3. To begin the jailbreak simply move the slider to right. [slide to jailbreak]
4. You will be displayed a status bar as the download progresses.
5. Once the download is complete the jailbreak process will begin
6. Once you are notified that the jailbreak process is complete press the OK button.
7. Press the Home button to reveal Cydia on your desktop!
8. Congratulations you are done! You may now continue by installing UltraSn0w to unlock :)
Unlock :-
You still can't use your iPhone because your SIM is not officially iPhone carrier. In Malaysia, if you want to use iPhone 4, you need to wait for Maxis announced it arrival. Maxis is a official carrier for iPhone in Malaysia. So if you're using others service such as Celcom or DIGI, then you need to unlock it first. :) Here's how :-
Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, 05.13.04, or 01.59 baseband(modem firmware).
1. Launch Cydia Installer from your SpringBoard.Make sure you get connected to the internet.
2. Press to select the Manage tab at the bottom of the screen.
3. Press to select the large Sources button
4. If the ultrasn0w repo is not present press the Edit button at the top right of the screen.
Otherwise, skip to step nine.
5. Press the Add button at the top left of the screen.
6. Enter http://repo666.ultrasn0w.com/ as the source url and press the Add Source button.
7. Once the source has been added press the large Return to Cydia button.
8. Press the Done button at the top right of the screen.
9. Press to select repo666.ultrasn0w.com from the list of user entered sources.
10.Press to select ultrasn0w from the list of packages
11.Press the Install button at the top right of the screen.
12.Press the Confirm button at the top right of the screen.
13.After installation completes successfully press the large Return to Cydia button.
14.Now press the Home button then power off and power on the iPhone.
15.You should now be able to insert the SIM of your choice! :D
A big thank you to all the members of the iPhone Dev-Team for all their hard work! It is much appreciated by all.
That's it fellas.
Tuesday, August 3, 2010
Install Awstats on Ubuntu 10.04
AWStats is a free powerful and featureful tool that generates advanced web, streaming, ftp or mail server statistics, graphically. This log analyzer works as a CGI or from command line and shows you all possible information your log contains, in few graphical web pages. It uses a partial information file to be able to process large log files, often and quickly. It can analyze log files from all major server tools like Apache log files (NCSA combined/XLF/ELF log format or common/CLF log format), WebStar, IIS (W3C log format) and a lot of other web, proxy, wap, streaming servers, mail servers and some ftp servers.
This is how to install Awstats on Ubuntu 10.04 :-
Go to the terminal or ssh to your terminal. :- ssh 10.23.140.222 -l dzul
note change to your server ip or domain, in my case is 10.23.140.222 which is my testing server.
Then issue this command :-
sudo apt-get install awstats
If you to see the country of your visitors then :-
sudo apt-get install libnet-ip-perl
sudo apt-get install libgeo-ipfree-perl
Now we need to configure the Apache to works with awstats. Let's assume you want to analyze the Apache 2 log file of your website “yourdomain.com” (It can be just an IP address).
Create configuration file :-
sudo cp /etc/awstats/awstats.conf /etc/awstats/awstats.yourdomain.com.conf
and update these parameters :-
# apache2
LogFile="/var/log/apache2/access.log"
# domain name
SiteDomain="yourdomain.com"
HostAliases="localhost 127.0.0.1 yourdomain.com"
LogFormat=1
LoadPlugin="tooltips
LoadPlugin="geoipfree"
NOw we to run our awstats by issuing the following command :-
sudo /usr/lib/cgi-bin/awstats.pl -config=yourdomain.com -update
You should see the output something like this :-
Create/Update database for config "/etc/awstats/awstats.yourdomain.com.conf" by AWStats version 6.9(build 1.892)
From data in log file "/var/log/apache2/access.log"...
Phase 1 : First bypass old records, searching new record...
Searching new records from beginning of log file...
Phase 2 : Now process new records (Flush history on disk after 20000 hosts)...
Jumped lines in file: 0
Parsed lines in file: 191338
Found 0 dropped records,
Found 24 corrupted records,
Found 0 old records,
Found 191314 new qualified records.
After that we need to configure Apache to view the statistics. Create a file call statistics at /etc/apache2/conf.d/ directory.
cd /etc/apache2/conf.d/
nano -w statistics
and add the following parameters to that file.
Alias /awstatsclasses "/usr/share/awstats/lib/"
Alias /awstats-icon/ "/usr/share/awstats/icon/"
Alias /awstatscss "/usr/share/doc/awstats/examples/css"
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
ScriptAlias /statistics/ /usr/lib/cgi-bin/
Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
restart your apache :-
sudo /etc/init.d/apache2 restart
if anything goes well, you're done.
To view your statistics, point to your browser like this :-
http://yourdomain.com/statistics/awstats.pl?
If you have more than one config file, then point to your browser like this :-
http://yourdomain.com/statistics/awstats.pl?config=yourdomain.com
Lastly edit your crontab and add the following parameter:-
# update every 10 min
*/10 * * * * root /usr/lib/cgi-bin/awstats.pl -config=yourdomain.com -update > /dev/null
:) Viola. Give it a try!
This is how to install Awstats on Ubuntu 10.04 :-
Go to the terminal or ssh to your terminal. :- ssh 10.23.140.222 -l dzul
note change to your server ip or domain, in my case is 10.23.140.222 which is my testing server.
Then issue this command :-
sudo apt-get install awstats
If you to see the country of your visitors then :-
sudo apt-get install libnet-ip-perl
sudo apt-get install libgeo-ipfree-perl
Now we need to configure the Apache to works with awstats. Let's assume you want to analyze the Apache 2 log file of your website “yourdomain.com” (It can be just an IP address).
Create configuration file :-
sudo cp /etc/awstats/awstats.conf /etc/awstats/awstats.yourdomain.com.conf
and update these parameters :-
# apache2
LogFile="/var/log/apache2/access.log"
# domain name
SiteDomain="yourdomain.com"
HostAliases="localhost 127.0.0.1 yourdomain.com"
LogFormat=1
LoadPlugin="tooltips
LoadPlugin="geoipfree"
NOw we to run our awstats by issuing the following command :-
sudo /usr/lib/cgi-bin/awstats.pl -config=yourdomain.com -update
You should see the output something like this :-
Create/Update database for config "/etc/awstats/awstats.yourdomain.com.conf" by AWStats version 6.9(build 1.892)
From data in log file "/var/log/apache2/access.log"...
Phase 1 : First bypass old records, searching new record...
Searching new records from beginning of log file...
Phase 2 : Now process new records (Flush history on disk after 20000 hosts)...
Jumped lines in file: 0
Parsed lines in file: 191338
Found 0 dropped records,
Found 24 corrupted records,
Found 0 old records,
Found 191314 new qualified records.
After that we need to configure Apache to view the statistics. Create a file call statistics at /etc/apache2/conf.d/ directory.
cd /etc/apache2/conf.d/
nano -w statistics
and add the following parameters to that file.
Alias /awstatsclasses "/usr/share/awstats/lib/"
Alias /awstats-icon/ "/usr/share/awstats/icon/"
Alias /awstatscss "/usr/share/doc/awstats/examples/css"
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
ScriptAlias /statistics/ /usr/lib/cgi-bin/
Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
restart your apache :-
sudo /etc/init.d/apache2 restart
if anything goes well, you're done.
To view your statistics, point to your browser like this :-
http://yourdomain.com/statistics/awstats.pl?
If you have more than one config file, then point to your browser like this :-
http://yourdomain.com/statistics/awstats.pl?config=yourdomain.com
Lastly edit your crontab and add the following parameter:-
# update every 10 min
*/10 * * * * root /usr/lib/cgi-bin/awstats.pl -config=yourdomain.com -update > /dev/null
:) Viola. Give it a try!